Radon Testing in Baltimore County & Baltimore City
Radon is the leading cause of lung cancer in non-smokers, and the only way to know your level is to test. We handle radon inspections across Baltimore County and Baltimore City: a 48-hour test placed and picked up by a licensed Maryland home inspector, with a written report you can hand straight to your agent.
Call (443) 761-9209 Request InspectionWhat Is Radon — And Why Maryland Homes Are at Risk
Radon is a naturally occurring radioactive gas produced by the decay of uranium in soil and rock. It seeps up through the ground and enters homes through foundation cracks, sump pits, floor drains, and construction joints — then gets trapped inside.
Maryland sits on geology with elevated uranium concentrations, making it one of the higher-risk states in the Mid-Atlantic. The Baltimore metro area, Anne Arundel County, and the surrounding region all have documented elevated radon readings in residential properties.
You cannot see, smell, or taste radon. The only way to know your home’s radon level is to test.
EPA Radon Level Guide
The average indoor radon level is about 1.3 pCi/L. The average outdoor level is 0.4 pCi/L.
Radon in Baltimore County and Baltimore City
Radon comes from uranium breaking down in the soil and rock under a house. It gets in through the gaps you find in every Baltimore-area foundation: slab cracks, the open cores of block walls, floor drains, sump pits, and the dirt floor still sitting in the corner of plenty of older basements. Levels can vary a lot from house to house, even on the same street, so a neighbor’s result doesn’t tell you much about yours.
Here’s what the state’s own data shows:
- Elevated levels show up everywhere. The Maryland Department of the Environment (MDE) says homeowners in every county and in Baltimore City have reported elevated radon.
- It’s common statewide. MDE estimates that nearly 3 in 10 Maryland homes are above EPA’s 4 pCi/L action level, and close to another 20% fall between 2 and 4 pCi/L, the range where EPA says to consider fixing.
- Baltimore County results run close to the action level. In MDE’s low-cost test kit program, the 170 kits analyzed from Baltimore County between July 2024 and July 2025 averaged 3.35 pCi/L. That’s a small, self-selected sample, not a survey. Still, an average that close to 4 means a lot of individual homes came in above it.
- Zone maps don’t replace a test. EPA’s county radon zone map is meant to help governments target resources. EPA says outright that it “should not be used to determine if individual homes need to be tested.” Every home should be tested, whatever its zone.
Local housing stock matters too. In Towson, Parkville, Catonsville, Dundalk, and Essex, the classic house is a brick or block-foundation home from the 1920s to the 1960s with a full basement, often finished later. In the city, most rowhouses have a basement or cellar under each unit, sometimes with original floors and old drain openings. Both setups give soil gas a lot of ways in. Finishing a basement can also raise your exposure without changing the radon level at all, because the family is now spending hours a day on the lowest level. If you’ve added a basement bedroom, family room, or office since your last test, it’s time to test again.
Timing also matters in a sale. EPA recommends that buyers know the radon level of any home they’re considering and that sellers test before listing. Doing the test during the inspection contingency keeps your options open if the number comes back high.
Our Radon Testing Process
We follow strict EPA measurement protocols to ensure accurate, defensible results you can act on.
Schedule and Prepare
We confirm your appointment and provide preparation instructions. Closed-house conditions (windows and exterior doors closed) must be maintained for at least 12 hours before and during the test.
Place Certified Test Devices
We deploy calibrated, continuous electronic radon monitors or EPA-approved short-term devices in the lowest livable area of the home — typically the basement or first floor.
48-Hour Measurement Period
The test runs for a minimum of 48 hours, capturing continuous radon readings. Closed-house conditions must be maintained throughout the testing window.
Device Retrieval and Analysis
We retrieve the testing devices and immediately analyze or send to an accredited laboratory. Electronic monitors display results on-site; lab-based devices return results within 24-48 hours.
Written Report Delivery
You receive a written report showing your radon concentration in picocuries per liter (pCi/L), how it compares to EPA guidelines, and clear recommendations for next steps.
Mitigation Guidance if Needed
If levels exceed 4 pCi/L, we explain your mitigation options and can refer you to a qualified radon mitigation contractor (look for NRPP or NRSB certification). EPA’s guide puts a typical professional mitigation at about $800–$2,500; get 2–3 quotes.
What’s Included in Your Radon Test
Every radon test includes everything needed to get a complete, certified measurement.
- EPA-protocol short-term radon measurement (48-96 hours)
- Certified, calibrated testing equipment
- Closed-house condition guidance sent before testing
- Lowest-livable-level placement per EPA standards
- Written report with pCi/L results and EPA comparison
- Same-day or next-day results (electronic monitors)
- Plain-language explanation of what results mean
- Mitigation referral if levels exceed action level
- Add-on available: combined with full home inspection
When to Get Tested
The EPA recommends radon testing in every home. These situations make it especially important:
Buying a Home
Order radon testing during your inspection contingency period so you can negotiate for mitigation if needed.
Selling a Home
Know your levels before listing. A clean radon report is a selling point; a mitigation system already in place is even better.
New Construction
Even new homes can have elevated radon. Test before move-in or during the first year of occupancy.
Never Tested
The EPA recommends testing every home. If you have never tested, schedule a measurement regardless of home age.
Radon Guides for Maryland Homeowners and Buyers
- Radon in Maryland homes: a Baltimore buyer’s guide. How radon fits into a purchase, from the contingency through settlement.
- What radon mitigation costs in Maryland. System types, typical price ranges, fan operating costs, and red flags in a quote.
- High radon test results: what to do next. How to read your number, when to retest, and the steps for buyers, sellers, and homeowners.
Buying a home? Radon testing is $175 when you add it to a pre-purchase home inspection. If it’s a city rowhouse, our Baltimore rowhouse inspection guide covers what else to look at in the basement.
Why Baltimore Homeowners Choose Us
We are not a lab-kit-in-a-bag service. We are licensed inspectors who follow strict EPA protocols and give you results you can trust.
Licensed and Independent
We are licensed Maryland home inspectors. Our radon measurements follow EPA protocol — not shortcuts.
Fast Turnaround
Electronic monitors provide same-day results. We never make you wait a week to find out if your home is safe.
Clear Reporting
Your report is written in plain English with an unambiguous recommendation — no jargon, no guesswork.
Real Estate Ready
Our reports meet Maryland real estate transaction standards and are accepted by buyers, sellers, and lenders.
Bundle and Save
Radon testing is $175 whether it’s standalone or bundled with a home inspection — bundling it in is simply the most convenient way to evaluate a property in one visit.
Serves All of Maryland
Baltimore City, Baltimore County, Anne Arundel, Howard, Harford, Carroll, Montgomery and Prince George’s counties.
Why a Dual-Licensed Inspector Matters for Radon
Jonathan Kruse is a licensed Maryland home inspector and also a licensed Maryland home improvement contractor. We test radon; we don’t sell or install mitigation systems, so we have no stake in what your number turns out to be. What the contractor license adds is practical context once you have a result. If mitigation makes sense, we can walk you through what a system in your specific house would likely involve: where the suction point would probably go in your basement or slab, how the pipe could reach the roofline on a rowhouse or a split-level, whether there’s a sump pit or crawlspace to deal with, and what a finished basement might mean for the install. Your negotiation, or your conversation with a mitigation contractor, starts from facts instead of guesses.
Frequently Asked Questions
How much does radon testing cost in Baltimore?
A standalone radon test from Precision Home Inspections is $175, whether it’s standalone or added to a home inspection. A travel fee applies beyond 20 miles. The price covers placing the test equipment, the 48-hour measurement, pickup, and a written report.
How long does a radon test take?
The test runs for at least 48 hours, which is EPA’s minimum for a short-term test. The house also needs to be closed up (windows and outside doors shut, apart from normal coming and going) for at least 12 hours before the test starts and for the whole test. Plan on about three days from setup to pickup.
Can I use a DIY radon test kit instead of hiring a professional?
For a homeowner who just wants to check their own house, a DIY kit is a reasonable first step, and MDE has offered low-cost kits to Maryland residents. In a real estate deal, a professional test is the better choice. EPA suggests hiring a qualified tester when buying or selling. The equipment is placed in the right spot, the closed-house conditions are documented, and both sides get a report from a party with no stake in the sale.
Is radon testing required when buying a home in Maryland?
There’s no statewide requirement. Maryland’s seller disclosure rules cover what a seller actually knows about hazards like radon, but they don’t require a test. Montgomery County is the notable exception: since October 1, 2016, most sales of detached homes and townhomes there need a radon test before settlement, done no more than a year in advance, with results given to both buyer and seller. In Baltimore County and Baltimore City, testing is the buyer’s choice. It’s usually written into the contract as part of the inspection contingency.
What happens if my radon test comes back high?
If the result is 4 pCi/L or higher, EPA recommends fixing the home. In a real estate test, that’s typically based on the average of the test results. Between 2 and 4 pCi/L, EPA says to consider fixing. Most homes are fixed with a sub-slab depressurization system, a pipe and fan that pull soil gas from under the floor and vent it above the roof. Our guide to high radon results walks through the next steps.
Does every home in Baltimore need radon testing?
EPA recommends testing every home, whatever the zone map says, and MDE reports elevated radon in every Maryland county and Baltimore City. Houses with basements, crawlspaces, or living space on the lowest level are where we see the most exposure. Slab and upper-floor units aren’t automatically in the clear.
Can I live in my home during the radon test?
Yes. Live normally: use the doors to come and go, run the heat or AC as usual, and cook and shower as normal. Keep windows closed, don’t run whole-house or window fans that pull in outside air, and leave the test equipment where it was placed.
When will I get my radon results?
We pick up the equipment after the 48-hour test, and you get a written report with the result and what it means. In a real estate deal, we coordinate timing so the result lands inside your inspection contingency window.
How often should I retest for radon?
EPA recommends retesting at least every two years. Also retest after a mitigation system is installed (EPA says no sooner than 24 hours after it starts running and within 30 days), after major renovations, and any time you start using a lower level of the house as living space.
How do I schedule a radon inspection?
Call (443) 761-9209 or use our contact page. Tell us the address, whether it’s a sale, and your contingency deadline, and we’ll fit the test in around your other inspections.
Ready to Know Your Home’s Radon Level?
Radon testing is fast, non-invasive, and the only way to know for sure. Schedule your radon test today.
Call (443) 761-9209